skip to Main Content

Getting started with iStaySafeAlert is easy.

We have created these helpful guides and FAQ's to help you connect to those who care.

Before you download and install the iStaySafeAlert app on your mobile you will need to ensure that your device has been added to an iStaySafe account. You should receive an SMS with an activation code. You'll need to contact your supplier to set this up.

FAQ’s & Tips

Check the following:

Your phone has enough battery to enable location services to keep running.

Your app is running in the back ground and has not been closed fully.

You have not turned on 'Stop location Updates' in the settings section on the iStaySafeAlert app.

You have not updated your TicTocAlert app to the most recent version.

Press button to stop beeping at any time. The device beeps when back in range and reconnected.
The location updates every 60 seconds if your phone is moving.
First thing in the morning press app to ensure it is open and running for the day.

Use the provided button opener to change the battery. Using anything else may damage the case and will void your warranty.

The button opener disc has a small 'key' section which fits into the small slot along the battery seam. Place the key into the slot and turn the key to pry open the two button case sections. Take care not to lose any internal parts, especially the rubber liner which forms the waterproofing. The case sections do separate from the internal workings.

Replace the battery and ensure that the internal section is facing the correct way for the button to action before closing the button case sections.

Be sure to dispose of the battery button thoughtfully. Battery buttons are a hazard for small children.

Try the following

Make sure Bluetooth is turned on in your phone Un-pair any old button devices and take them more than 50 meters away from your mobile.

If the button is new, ensure that you have activated the button by pressing the button for 5 seconds so see the blue lights flash and the device 'beep'.

Bring the button close to the phone until you see it appear in the 'available devices' section under the iStaySafeAlert settings.

If you do not see the device available try previous steps again.

Back To Top